Term-1st
| S.No. | UNIT | Periods Marks | Marks |
|---|---|---|---|
| 1 | Solid State | 8 | 10 |
| 2 | Solution | 8 | |
| 3 | p-Block Elements | 7 | |
| 4 | Haloalkanes and Haloarenes | 9 | 10 |
| 5 | Alcohols, Phenols and Ethers | 9 | 15 |
| 6 | Biomolecules | 8 | |
| 8 | Total | 49 | 35 |
| S. No | Practical | Mar ks |
|---|---|---|
| 1 | Volumetric Analysis | 4 |
| 2 | Salt Analysis | 4 |
| 3 | Content Based experiment | 2 |
| 4 | Class record and viva(Internal Examiner) | 5 |
| Total | 15 |
प्रथम सत्र
| क्रम संख्या | इकाई | कालांश | अंक |
|---|---|---|---|
| 1 | ठोस अवस्था | 8 | 10 |
| 2 | विलयन | 8 | |
| 3 | पी-ब्लॉक तत्व | 7 | 10 |
| 4 | हेलोऐल्केन और हेलोएरेनेस | 9 | 15 |
| 5 | अल्कोहल, फिनोल और ईथर | 9 | |
| 6 | जैविक अणु | 8 | |
| कुल योग | 49 | 35 |
| क्रम संख्या | प्रयोग | अंक |
|---|---|---|
| 1 | आयतनिक विश्लेषण | 4 |
| 2 | लवण विश्लेषण | 4 |
| 3 | सामग्री आधारित प्रयोग | 2 |
| 4 | अंतर्निहित वस्तु आधारित प्रयोग कक्षा रिकॉर्ड और मौखिक (आंतरिक परीक्षक) | 5 |
| कुल योग | 15 |
Solid State:– Classification of solids based on different binding forces: molecular, ionic, covalent and metallic solids, amorphous and crystalline solids (elementary idea). Unit cell in two dimensional and three dimensional lattices, calculation of density of unit cell, packing in solids, packing efficiency, voids, number of atoms per unit cell in a cubic unit cell, point defects. ठोस अवस्था: – विभिन्न योजक बलों के आधार पर ठोस का वर्गीकरण: आणविक, आयनिक, सहसंयोजक और धात्विक ठोस, अक्रिस्टलिय और क्रिस्टलीय ठोस (प्राथमिक विचार)। दो आयामी और तीन आयामी जाली में यूनिट सेल, यूनिट सेल के घनत्व की गणना, ठोस में पैकिंग, पैकिंग दक्षता, रिक्तियों, एक क्यूबिक यूनिट सेल में प्रति यूनिट सेल में परमाणुओं की संख्या, बिंदु दोष।
Solutions: Types of solutions, expression of concentration of solutions of solids in liquids, solubility of gases in liquids, solid solutions, Raoult’s law, colligative properties – relative lowering of vapour pressure, elevation of boiling point, depression of freezing point, osmotic pressure, determination of molecular masses using colligative properties. विलयन: विलयन के प्रकार, तरल पदार्थों में ठोस पदार्थों की सांद्रताकी अभिव्यक्ति, तरल पदार्थों में गैसों की घुलनशीलता, ठोस विलयन, राउल्ट का नियम, कोलिगेटिव गुण – वाष्प के दबाव में सापेक्ष कमी, क्वथनांक का उन्नयन, हिमांक का अवनमन, परासरणी दवाब, कोलिगेटिव गुणों का उपयोग करके आणविक द्रव्यमान का निर्धारण।
p Block Elements: Group -15 Elements: General introduction, electronic configuration, occurrence, oxidation states, trends in physical and chemical properties; Nitrogen preparation properties and uses; compounds of Nitrogen: preparation and properties of Ammonia and Nitric Acid.
Group 16 Elements: General introduction, electronic configuration, oxidation states, occurrence,
trends in physical and chemical properties, dioxygen: preparation, properties and uses, classification of Oxides, Ozone, Sulphur -allotropic forms; compounds of Sulphur: preparation properties and uses of Sulphur-dioxide, Sulphuric Acid: properties and uses; Oxoacids of Sulphur (Structures only).
Group 17 Elements: General introduction, electronic configuration, oxidation states, occurrence,
trends in physical and chemical properties; compounds of halogens, Preparation, properties and
uses of Chlorine and Hydrochloric acid, interhalogen compounds, Oxoacids of halogens (structures only).
Group 18 Elements: General introduction, electronic configuration, occurrence, trends in physical
and chemical properties, uses.
पी ब्लॉक तत्व: समूह -15 तत्व: सामान्य परिचय, इलेक्ट्रॉनिक विन्यास, घटना, ऑक्सीकरण राज्य, भौतिक और रासायनिक गुणों में रुझान; नाइट्रोजन तैयारी गुण और उपयोग; नाइट्रोजन के यौगिक: अमोनिया और नाइट्रिक एसिड की तैयारी और गुण।
समूह 16 तत्व: सामान्य परिचय, इलेक्ट्रॉनिक विन्यास, ऑक्सीकरण राज्य, घटना,
भौतिक और रासायनिक गुणों में रुझान, डाइअॉॉक्सिन: तैयारी, गुण और उपयोग, ऑक्साइड का वर्गीकरण, ओजोन, सल्फर -एलोट्रोपिक रूप; सल्फर के यौगिक: सल्फर-डाइऑक्साइड के गुण और उपयोग, सल्फ्यूरिक एसिड: गुण और उपयोग; सल्फर के ऑक्सोएसिड (केवल संरचनाएं)।
समूह 17 तत्व: सामान्य परिचय, इलेक्ट्रॉनिक विन्यास, ऑक्सीकरण राज्य, घटना,
भौतिक और रासायनिक गुणों में रुझान; हैलोजन के यौगिक, तैयारी, गुण और
क्लोरीन और हाइड्रोक्लोरिक एसिड, इंटरहैलोजन यौगिकों, हैलोजन के ऑक्सोएसिड (केवल संरचनाएं) का उपयोग।
समूह 18 तत्व: सामान्य परिचय, इलेक्ट्रॉनिक विन्यास, घटना, भौतिक में रुझान trends
और रासायनिक गुण, उपयोग।
Haloalkanes and Haloarenes: Haloalkanes: Nomenclature, nature of C–X bond, physical and
chemical properties, optical rotation mechanism of substitution reactions.
Haloarenes: Nature of C–X bond, substitution reactions (Directive influence of halogen in
monosubstituted compounds only).
हेलोऐल्केन और हेलोएरेनेस: हेलोऐल्केन्स: नामकरण, सी-एक्स बॉन्ड की प्रकृति, भौतिक और
रासायनिक गुण, प्रतिस्थापन प्रतिक्रियाओं के ऑप्टिकल रोटेशन तंत्र।
हेलोएरेनेस: सी-एक्स बांड की प्रकृति, प्रतिस्थापन प्रतिक्रियाएं (हैलोजन का प्रत्यक्ष प्रभाव)
केवल मोनो-प्रतिस्थापित यौगिक)।
Alcohols, Phenols and Ethers: Alcohols: Nomenclature, methods of preparation, physical and
chemical properties (of primary alcohols only), identification of primary, secondary and tertiary
alcohols, mechanism of dehydration.
Phenols: Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol, electrophillic substitution reactions, uses of phenols.
Ethers: Nomenclature, methods of preparation, physical and chemical properties, uses.
अल्कोहल, फिनोल और ईथर: अल्कोहल: नामकरण, तैयारी के तरीके, भौतिक और
रासायनिक गुण (केवल प्राथमिक अल्कोहल के), प्राथमिक, द्वितीयक और तृतीयक की पहचान
शराब, निर्जलीकरण का तंत्र।
फिनोल: नामकरण, तैयारी के तरीके, भौतिक और रासायनिक गुण, फिनोल की अम्लीय प्रकृति, इलेक्ट्रोफिलिक प्रतिस्थापन प्रतिक्रियाएं, फिनोल के उपयोग।
ईथर: नामकरण, तैयारी के तरीके, भौतिक और रासायनिक गुण, उपयोग।
बायोमोलेक्यूल्स: कार्बोहाइड्रेट – वर्गीकरण (एल्डोस और केटोज), मोनोसैकेराइड्स (ग्लूकोज और फ्रुक्टोज), डी-एल कॉन्फ़िगरेशन
प्रोटीन – का प्राथमिक विचार – अमीनो एसिड, पेप्टाइड बॉन्ड, पॉलीपेप्टाइड्स, प्रोटीन, की संरचना प्रोटीन – प्राथमिक, द्वितीयक, तृतीयक संरचना और चतुर्धातुक संरचनाएं (केवल गुणात्मक विचार),
प्रोटीन का विकृतीकरण।
न्यूक्लिक एसिड: डीएनए और आरएनए
Biomolecules: Carbohydrates – Classification (aldoses and ketoses), monosaccahrides (glucose and fructose), D-L configuration
Proteins -Elementary idea of – amino acids, peptide bond, polypeptides, proteins, structure of
proteins – primary, secondary, tertiary structure and quaternary structures (qualitative idea only),
denaturation of proteins.
Nucleic Acids: DNA and RNA
बायोमोलेक्यूल्स: कार्बोहाइड्रेट – वर्गीकरण (एल्डोस और केटोज), मोनोसैकेराइड्स (ग्लूकोज और फ्रुक्टोज), डी-एल कॉन्फ़िगरेशन
प्रोटीन – का प्राथमिक विचार – अमीनो एसिड, पेप्टाइड बॉन्ड, पॉलीपेप्टाइड्स, प्रोटीन, की संरचना
प्रोटीन – प्राथमिक, द्वितीयक, तृतीयक संरचना और चतुर्धातुक संरचनाएं (केवल गुणात्मक विचार),
प्रोटीन का विकृतीकरण।
न्यूक्लिक एसिड: डीएनए और आरएनए
Practical Term-1
A 15-mark Practical would be conducted under the supervision of subject teacher/ internal
examiner. This would contribute to the overall practical marks for the subject.
OR In case the situation of lockdown continues until Nov-Dec 2021, a Practical Based Assessment (pen paper) of 15 marks would be conducted at the end of Term I at the school level and marks would be submitted by the schools to the Board. This would contribute to the overall practical marks for the subject.
(1) Volumetric analysis (4 marks)
Determination of concentration/ molarity of KMnO4 solution by titrating it against a standard
solution of:
i. Oxalic acid,
ii. Ferrous Ammonium Sulphate
(Students will be required to prepare standard solutions by weighing themselves).
(1) आयतनिक (वॉल्यूमेट्रिक) विश्लेषण (4 अंक)
KMnO4 विलयन को एक मानक के विरुद्ध अनुमापन करके उसकी सांद्रता/मोलरता का निर्धारण
का समाधान:
मैं। ओकसेलिक अम्ल,
ii. फेरस अमोनियम सल्फेट
(छात्रों को स्वयं तौल कर मानक हल तैयार करना होगा)
(2) Salt analysis (Qualitative analysis) (4 marks)
Determination of one cation and one anion in a given salt.
Cations- Pb2+, Cu2+, As3+, Al3+, Fe3+ ,Mn2+, Ni2+, Zn2+, Co2+, Ca2+, Sr2+, Ba2+, Mg2+,NH4+ Anions – CO32- , S2- , NO2- , SO32- , SO42- , NO3-, Cl– , Br– , I– , PO43- , C2O42- ,CH3COO– (Note: Insoluble salts excluded)
(2) Salt analysis (Qualitative analysis) (4 marks)
Determination of one cation and one anion in a given salt. लवन विश्लेषण (गुणात्मक विश्लेषण) (4 अंक)
किसी दिए गए नमक में एक धनायनऔर एक ऋनायन निर्धारण। Cations ( धनायन:)- Pb2+, Cu2+, As3+, Al3+, Fe3+ ,Mn2+, Ni2+, Zn2+, Co2+, Ca2+, Sr2+, Ba2+, Mg2+,NH4+ Anions (ऋनायन ) – CO32- , S2- , NO2- , SO32- , SO42- , NO3-, Cl– , Br– , I– , PO43- , C2O42- ,CH3COO– (Note: Insoluble salts excluded)(नोट: अघुलनशील लवण को बाहर रखा गया है)
(3) Content Based Experiments (2 marks)
A. Chromatography
i. Separation of pigments from extracts of leaves and flowers by paper chromatography and
determination of Rf values.
ii. Separation of constituents present in an inorganic mixture containing two cations only
(constituents having large difference in Rf values to be provided).
B. Characteristic tests of carbohydrates, fats and proteins in pure samples and their detection in
given foodstuffs.
(3) विषयवस्तु आधारित प्रयोग (2 अंक)
ए क्रोमैटोग्राफी
कागज क्रोमैटोग्राफी द्वारा पत्तियों और फूलों के अर्क से वर्णक का पृथक्करण और
आरएफ मूल्यों का निर्धारण।
ii. केवल दो धनायनों वाले अकार्बनिक मिश्रण में मौजूद घटकों का पृथक्करण
(घटक जिनका Rf मानों में बड़ा अंतर है, प्रदान किया जाना है)।
B. शुद्ध नमूनों में कार्बोहाइड्रेट, वसा और प्रोटीन के अभिलक्षणिक परीक्षण और दी गई खाद्य सामग्रीdetection में उनका पता लगाना
